View TVL-55739GD032J-LW-G-AAN_8939356.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

TVL-55739GD032J-LW-G-AAN ver.b - 1 - i ssue date:2013/0 2 / 21 r r r o o o h h h s s s c c c o o o m m m p p p l l l i i i a a a n n n t t t approval sheet J J J J customer ?Q part no. a?? tvl-55739gd032j-lw -g-aan product type a? mode: trans-missive type, positive mode 3.2 tft lcd module 262k colors rohs G?a? non-compliance compliance remarks ] preliminary specification ? final specification ?? signature by customer: ?_J : approved by issued by qa checked by qa checked by pm qa rd
TVL-55739GD032J-LW-G-AAN ver.b - 2 - i ssue date:2013/0 2 / 21 r r r o o o h h h s s s c c c o o o m m m p p p l l l i i i a a a n n n t t t specification of lcd module product no.: tvl-55739gd032j-lw -g-aan issue date: 2013/02/21 kyocera display corporation 5-7-18, higashinippori arakawa-ku , tokyo 116-0014, japan tel: +81-3-5811-8780 fax: +81-3-5811-8782
TVL-55739GD032J-LW-G-AAN ver.b - 3 - i ssue date:2013/0 2 / 21 r r r o o o h h h s s s c c c o o o m m m p p p l l l i i i a a a n n n t t t table of contents 1. general description ................................ .................................3 2. features........................................... ..............................................3 3. mechanical specification ........................... .............................3 4. mechanical dimension ............................... ................................3 5. maximum ratings.................................... ......................................3 6. electrical characteristics ......................... ..........................3 6.1. tft lcd characteristic ............................. ................................................... .. 3 6.2. backlight characteristic ........................... ................................................... .... 3 7. module function description ........................ ........................3 7.1. pin description.................................... ................................................... ........ 3 7.2. timing characteristics ............................. ................................................... ..... 3 7.3. initialization table ............................... ................................................... ......... 3 7.4. power on sequence.................................. ................................................... .. 3 7.5. power off sequence ................................. ................................................... .. 3 8. electro-optical characteristics.................... ....................3 8.1. cie(x, y) chromaticity............................. ................................................... ...... 3 9. reliability ........................................ ..............................................3 9.1. tests.............................................. ................................................... .............. 3 9.2. color performance .................................. ................................................... ..... 3 10. inspection criteria................................ ..................................3 10.1. inspection conditions.............................. ................................................... . 3 10.2. light method ....................................... ................................................... ..... 3 10.3. classification of defects .......................... ................................................... 3 10.4. sampling & acceptable quality level ................ ......................................... 3 10.5. definition of inspection area ...................... ................................................ 3 10.6. items and criteria................................. ................................................... .... 3
TVL-55739GD032J-LW-G-AAN ver.b - 4 - i ssue date:2013/0 2 / 21 r r r o o o h h h s s s c c c o o o m m m p p p l l l i i i a a a n n n t t t 11. rohs compliant warranty ............................ .......................3 12. precautions for use ................................ ..............................3 12.1. safety............................................. ................................................... .......... 3 12.2. storage conditions................................. ................................................... .. 3 12.3. installing lcd module .............................. ................................................... 3 12.4. precautions for operation .......................... ................................................ 3 12.5. handling precautions ............................... ................................................... 3 12.6. guarantee .......................................... ................................................... ...... 3 13. revision history ................................... ....................................3
TVL-55739GD032J-LW-G-AAN ver.b - 5 - i ssue date:2013/0 2 / 21 r r r o o o h h h s s s c c c o o o m m m p p p l l l i i i a a a n n n t t t 1. general description TVL-55739GD032J-LW-G-AAN is a trans-missive type co lor active matrix liquid crystal display (lcd), which uses amorphous thin fi lm transistor (tft) as switching devices. this product is composed of a tft lcd pane l, driver ic, fpc backlight and a bezel unit. the following table described the featu res of TVL-55739GD032J-LW-G-AAN. 2. features transmissive type display mode tft lcd, positive display format rgb strip type driver ic. ili9481b color 262k color interface 18 bits rgb interface viewing direction higher contrast ratio: 6 oclock less gray scale reversal: 12 oclock backlight type / color led / white *6 3. mechanical specification item specifications unit dimensional outline 51.64(w)80.7(h)2.2(d) mm resolution 3203(r,g,b)480 dot active area 44.64(w)66.96(h) mm pixel pitch 0.1395(w)0.1395(h) mm
TVL-55739GD032J-LW-G-AAN ver.b - 6 - i ssue date:2013/0 2 / 21 r r r o o o h h h s s s c c c o o o m m m p p p l l l i i i a a a n n n t t t 4. mechanical dimension giantplus technology co.,ltd org date drawn by checked by concurred by approved by tolerance scale unit material finish mm revised record dwg no. dcn version p of project no : module : ab c d e customer's approval customer date 320xrgbx480 dots 51.640.15 47.720.15 (bezel opening) 44.64 (active area) (25.82) 1.960.15 3.50.35 80.70.15 70.280.15 (bezel opening) 66.96 (active area) 3.060.35 1.40.15 (36.54) 2.20.15 23.85 (bezel opening) 13.895 2.02 (bezel opening) 5.75 see detail c viewing direction (customer's application) 0.20.03 3.5 min (stiffener) stiffener conductive detail c scale 4:1 note: 1.silicone applied to cover whole pin surface but not ic 2.the dimension in brackets "()" are for refer ence only display scale 80:1 r g b r g b 0.1395 0.0465 0.1395 bezel 11.4 peeling tape 2.50.3 2.250.1 2.10.1 1.10.1 10.1 0.30.1 12.60.05 0.5 120.03 0.3 +0.04 -0.03 0.30.07 0.60.03 0.30.03 2.250.3 (silk line) 0.5 12.60.15 1.0 2.4 see detail a see detail b detail a scale 2:1 detail b scale 2:1 led circuit diagram (if=20ma) a k 2.990.3 13.40.1 rib (2-2x1) insulating tape (2.55) (bending area) 5.00.1 11.450.3 18.50.5 no. 24 38 7 5 symbol 6 1 res 9 12 14 13 11 10 15 gnd gnd fpc pin function nc gnd vsync gnd gnd d16 d15 de 16 d14 gnd plck d17 hsync d12 d1 d13 d11 d10 d9 d8 d6 cs d5 scl d4 d3 d0 d7 sda gnd 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 33 34 35 36 37 38 39 40 gnd iovcc vcc gnd d2 gnd 32 led_k 41 led_a silicone line of mark single layer area 19.120.3 5.860.5 11.970.3 41 1 41 1
TVL-55739GD032J-LW-G-AAN ver.b - 7 - i ssue date:2013/0 2 / 21 r r r o o o h h h s s s c c c o o o m m m p p p l l l i i i a a a n n n t t t 5. maximum ratings if the operating condition exceeds the following ab solute maximum ratings, the tft lcd module may be damaged permanently. values item symbol min. max. unit condition power supply for analog vcc -0.3 4.6 v power supply for digital iovcc -0.3 4.6 v storage temperature t st -30 80 c operating temperature (ambient temperature) t op -20 70 c humidity - - 90 %rh note 1 note1: t a Q 40 without dewing note2: a. all of voltage listed above are with respective to gnd=0v. b. device is subject to be damaged permanently if s tresses beyond those absolute maximum ratings listed above. 6. electrical characteristics 6.1. tft lcd characteristic typical operating conditions (gnd=avss=0v) item symbol min. typ. max. unit note analog power supply voltage vci 2.5 2.8 3.3 v i/o pin power supply voltage iovcc 1.65 1.8 3.3 v h v ih 0.7*iovcc - iovcc v driver input signal voltage l v il 0 - 0.3*iovcc v h v oh 0.8*iovcc - iovcc v driver output signal voltage l v ol 0 - 0.2*iovcc v supply current for logic idd - 16 24 ma sleep current i slp - 60 100 ? frame frequency f frame - 60 - hz
TVL-55739GD032J-LW-G-AAN ver.b - 8 - i ssue date:2013/0 2 / 21 r r r o o o h h h s s s c c c o o o m m m p p p l l l i i i a a a n n n t t t 6.2. backlight characteristic 6.2.1. characteristic values item symbol min. typ. max. unit remark led current i f - 20 - ma led voltage v f 17.4 - 21.6 v 6.2.2. lightguide specification a. test instrument bm-7 (distance =500mm field = 1 ) b. light source led * 6 (white) c. conditions i f = 20 ma(typ) d. measure brightness 1 ~ 9 e. uniformity = (min brightness / max brightness)*100% f. uniformity R 75%
TVL-55739GD032J-LW-G-AAN ver.b - 9 - i ssue date:2013/0 2 / 21 r r r o o o h h h s s s c c c o o o m m m p p p l l l i i i a a a n n n t t t 7. module function description 7.1. pin description pin symbol function 1 gnd ground 2 res this signal low will reset the device and must be applied to properly initialize chip. signal is low active. 3 nc no connect 4 gnd ground 5 vsync vertical sync input 6 gnd ground 7 hsync horizontal sync input 8 gnd ground 9 de data enable signal input 10 gnd ground 11 pclk pixel clock signal in dpi interface mode 12 gnd ground 13~30 d17~d0 data bit 17~data bit 0 31 cs chip select pin 32 gnd ground 33 scl serial clock input pin. 34 gnd ground 35 sda serial data input pin. 36 gnd ground 37 iovcc power supply for digital circuit 38 vcc power supply for analog circuit 39 gnd ground 40 led_k backlight led power (-) 41 led_a backlight led power (+)
TVL-55739GD032J-LW-G-AAN ver.b - 10 - i ssue date:2013/0 2 / 21 r r r o o o h h h s s s c c c o o o m m m p p p l l l i i i a a a n n n t t t 7.2. timing characteristics 7.2.1. serial interface(type c)
TVL-55739GD032J-LW-G-AAN ver.b - 11 - i ssue date:2013/0 2 / 21 r r r o o o h h h s s s c c c o o o m m m p p p l l l i i i a a a n n n t t t 7.2.2. dbi type c timing characteristics
TVL-55739GD032J-LW-G-AAN ver.b - 12 - i ssue date:2013/0 2 / 21 r r r o o o h h h s s s c c c o o o m m m p p p l l l i i i a a a n n n t t t 7.2.3. display pixel interface (dpi)
TVL-55739GD032J-LW-G-AAN ver.b - 13 - i ssue date:2013/0 2 / 21 r r r o o o h h h s s s c c c o o o m m m p p p l l l i i i a a a n n n t t t
TVL-55739GD032J-LW-G-AAN ver.b - 14 - i ssue date:2013/0 2 / 21 r r r o o o h h h s s s c c c o o o m m m p p p l l l i i i a a a n n n t t t
TVL-55739GD032J-LW-G-AAN ver.b - 15 - i ssue date:2013/0 2 / 21 r r r o o o h h h s s s c c c o o o m m m p p p l l l i i i a a a n n n t t t 7.2.4. dpi interface timing characteristics
TVL-55739GD032J-LW-G-AAN ver.b - 16 - i ssue date:2013/0 2 / 21 r r r o o o h h h s s s c c c o o o m m m p p p l l l i i i a a a n n n t t t 7.3. initialization table initial sequence step instruction/parameters r/w d/cx reg. description 1 power on power supply 2 delay 1ms 3 power on reset reset pin = low 4 delay 10ms 5 power on reset reset pin = high 6 delay 50ms 7 soft_reset w 0 01h 8 delay 20ms 9 exit_sleep_mode w 0 11h sleep out 10 delay 80ms w 0 36h 11 set_address_mode w 1 88h w 0 3ah 12 set_pixel_format w 1 66h w 0 d0h w 1 07h vci1 w 1 42h ddvdh,vcl,vgh,vgl 13 power_setting w 1 1bh vreg1out w 0 d1h w 1 00h w 1 24h vcomh 14 vcom control w 1 12h vcom amplitude w 0 d2h for normal mode w 1 02h 15 power _setting w 1 00h w 0 d3h for partial mode w 1 01h 16 power _setting w 1 22h w 0 d4h for idle mode w 1 01h 17 power _setting w 1 22h
TVL-55739GD032J-LW-G-AAN ver.b - 17 - i ssue date:2013/0 2 / 21 r r r o o o h h h s s s c c c o o o m m m p p p l l l i i i a a a n n n t t t w 0 c0h w 1 10h w 1 3bh w 1 00h w 1 02h 18 panel driving setting w 1 00h w 0 c1h w 1 10h w 1 10h 19 display_timing_setting w 1 22h w 0 c5h 20 frame rate_setting w 1 04h w 0 c6h 21 interface control w 1 02h pclk setting w 0 c8h w 1 00h w 1 37h w 1 02h w 1 26h w 1 0bh w 1 08h w 1 46h w 1 03h w 1 77h w 1 52h w 1 00h 22 gamma setting w 1 1eh w 0 e0h 23 nv memory write w 1 00h vm_d setting w 0 e1h 24 nv memory control w 1 00h vcm_pgm_en setting w 0 e2h w 1 00h w 1 00h 25 nv memory status read w 1 00h vcm data read value
TVL-55739GD032J-LW-G-AAN ver.b - 18 - i ssue date:2013/0 2 / 21 r r r o o o h h h s s s c c c o o o m m m p p p l l l i i i a a a n n n t t t w 0 e3h w 1 00h 26 nv memory protection w 1 00h w 0 b0h 27 command access protect w 1 00h mcap setting w 0 b3h w 1 02h memory write control w 1 00h w 1 00h 28 frame memory access and interface setting w 1 00h w 0 b4h 29 display and frame memory write mode setting w 1 11h dpi (rgb) interface w 0 f3h w 1 40h 30 power control w 1 0fh w 0 f6h 31 power control w 1 80h w 0 f7h w 1 80h 32 power control w 1 01h 33 set_display_on w 0 29h display on w 0 2ah w 1 00h w 1 00h w 1 01h 34 set_column_address w 1 3fh w 0 2bh w 1 00h w 1 00h w 1 01h 35 set_column_address w 1 dfh 36 write_memory_start w 0 2ch
TVL-55739GD032J-LW-G-AAN ver.b - 19 - i ssue date:2013/0 2 / 21 r r r o o o h h h s s s c c c o o o m m m p p p l l l i i i a a a n n n t t t 7.4. power on sequence
TVL-55739GD032J-LW-G-AAN ver.b - 20 - i ssue date:2013/0 2 / 21 r r r o o o h h h s s s c c c o o o m m m p p p l l l i i i a a a n n n t t t 7.5. power off sequence
TVL-55739GD032J-LW-G-AAN ver.b - 21 - i ssue date:2013/0 2 / 21 r r r o o o h h h s s s c c c o o o m m m p p p l l l i i i a a a n n n t t t 8. electro-optical characteristics led backlight transmissive module: (ewv polarizer) item symbol temp. min. typ. max. unit conditions tr 25 -- 20 30 ms response time tf 25 -- 10 15 ms =0 , =0 (note 2) contrast ratio cr 25 300 400 -- -- =0 , =0 led:on,light:off (note 1) uniformity -- -- 75 -- -- % -- luminance of white -- -- 380 -- -- cd/ O -- b 25 60 visual angle range front and rear f 25 45 degree =0 ,cr R 10 led:on, light:off (note 3) l 25 60 visual angle range left and right r 25 60 degree =90 ,cr R 10 led:on, light:off (note 3) visual angle direction priority -- -- 12 oclock gray scale inversion (note4) 8.1. cie(x, y) chromaticity transmissive item symbol min. typ. max. conditions x 0.60 0.64 0.68 red y 0.30 0.34 0.38 x 0.35 0.39 0.43 green y 0.52 0.56 0.60 x 0.11 0.15 0.19 blue y 0.02 0.06 0.10 x 0.28 0.32 0.36 white y 0.28 0.32 0.36 ntsc % 56 =0 , =0 bm-5a 1 angle
TVL-55739GD032J-LW-G-AAN ver.b - 22 - i ssue date:2013/0 2 / 21 r r r o o o h h h s s s c c c o o o m m m p p p l l l i i i a a a n n n t t t for lcm note 1: definition of contrast ratio (cr). contrast ratio is calculated with the following for mula. note 2: response time definition note 3 : ? ? ?? ? ? definition 100 % black white white brightness (%) time (ms) rise time, tr decay time, td 10 % (positive type) 9 0 %
TVL-55739GD032J-LW-G-AAN ver.b - 23 - i ssue date:2013/0 2 / 21 r r r o o o h h h s s s c c c o o o m m m p p p l l l i i i a a a n n n t t t note 4: visual angle direction priority note 5: optical measurement equipment setup -measurement should be executed in a stable, windle ss, and dark room(under 10 lunx). after lighting the backlight for 30mins. humidity=6015% -distance : 50cm -photodetector : bm-5 (field 1 o )
TVL-55739GD032J-LW-G-AAN ver.b - 24 - i ssue date:2013/0 2 / 21 r r r o o o h h h s s s c c c o o o m m m p p p l l l i i i a a a n n n t t t 9. reliability 9.1. tests no. item condition criterion 1 high temperature operating 70 240 hrs 2 low temperature operating -20 240 hrs 3 high temperature non-operating 80 240 hrs 4 low temperature non-operating -30 240 hrs 5 high temperature/ humidity non-operating 40 ,95%rh 240 hrs 6 temperature shock non-operating -30 80 ( 30min ) ( 30min ) 10 cycles 7 electrostatic discharge hbm: 2kv ? no defect of operational function in room temperature are allowable(235c). ? leakage current should be below double of initial value. note 1: test after 24 hours in room temperature(23 5c). note 2: the sampling above is individually for each reliability testing condition. note 3: the color fading of polarizing filter shoul d not care. note 4: all of the reliability testing chamber abov e, is using d.i. water.(min value: 1.0 m -cm) note 5: in case of malfunction defect caused by esd damage, if it would be recovered to normal state after resetting, it would be judged as a good part. 9.2. color performance no. item criterion (initial) 1 luminance >50% 2 ntsc >70% 3 contrast ratio >50%
TVL-55739GD032J-LW-G-AAN ver.b - 25 - i ssue date:2013/0 2 / 21 r r r o o o h h h s s s c c c o o o m m m p p p l l l i i i a a a n n n t t t 10. inspection criteria 10.1. inspection conditions 10.1.1. environmental conditions the environmental conditions for inspection shall b e as follows room temperature: 235c humidity: 5020%rh 10.1.2. the external visual inspection with a single 1000 200 lux fluorescent lamp as the light source, the inspection was in the distance of 30cm or more from the lcd to the inspectors eyes. 10.2. light method 10.2.1. environment lamp under 1000 200 lux, viewing direction for inspection over 300mm 10.2.2. the distance from eye to defect around 300mm, the d istance from nd filter to defect around 25~30mm eye 300mm defect place nd filter
TVL-55739GD032J-LW-G-AAN ver.b - 26 - i ssue date:2013/0 2 / 21 r r r o o o h h h s s s c c c o o o m m m p p p l l l i i i a a a n n n t t t 10.3. classification of defects 10.3.1. major defect a major defect refers to a defect that may substant ially degrade usability for product applications. 10.3.2. minor defect a minor defect refers to a defect which is not cons idered to be able substantially degrade the product application or a defect that deviates from existing standards almost unrelated to the effectiv e use of the product or its operation. notes: if the lcd/lcm s cosmetic and display perfo rmance do not specify in inspection criterion, it should be based on th ese delivered samples. 10.4. sampling & acceptable quality level level ii, mil-std-105e major minor cosmetic 1.0 % 1.5 % electrical-display 0.4% 0.65 % 10.5. definition of inspection area v.a: viewing area a.a: active area active area viewing area outside of viewing area
TVL-55739GD032J-LW-G-AAN ver.b - 27 - i ssue date:2013/0 2 / 21 r r r o o o h h h s s s c c c o o o m m m p p p l l l i i i a a a n n n t t t 10.6. items and criteria 10.6.1. visual inspection criterion in cosmetic (1) glass defect no defect criteria remark 1 dimension (minor) by engineering diagram x y z 2 cracks (major) extensive crack reject (2) lcm appearance defect within a.a no defect criteria remark spec. permissible qty Q 0.10mm disregard 0.10mm< Q 0.20mm 3 1 round type (minor) 0.20mm< 0 1. =(l+w)/2, l: length, w: width 2. disregard if out of a.a. spec. permissible qty w Q 0.03mm disregard l Q 3.0mm and 0.03mm0.10mm or l>3.0mm 0 1. l: length, w: width 2. disregard if out of a.a. spec. permissible qty Q 0.20mm disregard 0.20mm< Q 0.30mm 2 3 polarizer bubble/ dent (minor) 0.30mm< Q 0.50mm 1 1. =(l+w)/2 , l: length, w: width 2. disregard if out of a.a. w l l w l w
TVL-55739GD032J-LW-G-AAN ver.b - 28 - i ssue date:2013/0 2 / 21 r r r o o o h h h s s s c c c o o o m m m p p p l l l i i i a a a n n n t t t 0.50mm< 0 (3) fpc no defect criteria remark 1 copper peeling (minor) copper peeling reject (4) black tape no defect criteria remark 1 shift (minor) ic exposed reject 2 no black tape (minor) no black tape reject (5) silicon no defect criteria remark 1 amount of silicon (minor) ito exposed reject (6) bezel no defect criteria remark 1 oxidized spot (minor) oxidized spot, rust reject 2 outline deformation (minor) by engineering diagram 3 greasiness (minor) greasiness reject 4 spots, round type (minor) h Q by engineering diagram disregard h=total height (thickness ) 5 plating (minor) bubble, peeling reject (7) power cord no defect criteria remark 1 power cord (minor) power core loose
TVL-55739GD032J-LW-G-AAN ver.b - 29 - i ssue date:2013/0 2 / 21 r r r o o o h h h s s s c c c o o o m m m p p p l l l i i i a a a n n n t t t 10.6.2. visual inspection criterion in electrical display lcm electrical criterion no defect criteria remark 1 no display (major) not allowed 2 missing line (major) not allowed 3 darker or lighter line (major) not allowed spec. permissible qty bright point 1 4 bright / dark point (minor) dark point 2 1: 1sub-pixel : 1r or 1g or 1b 2: point defect area R 1/2 sub pixel. spec. permissible qty Q 0.10mm disregard 0.10mm< Q 0.20mm 3 5 round type (minor) 0.20mm< 0 1. =(l+w)/2, l: length, w: width 2. disregard if out of a.a. spec. permissible qty w Q 0.03mm disregard l Q 3.0mm and 0.03mm0.10mm or l>3.0mm 0 1. l: length, w: width 2. disregard if out of a.a. l w w l
TVL-55739GD032J-LW-G-AAN ver.b - 30 - i ssue date:2013/0 2 / 21 r r r o o o h h h s s s c c c o o o m m m p p p l l l i i i a a a n n n t t t 7 mura (minor) by 5% nd filter invisible note1 ? issues that are not defined in this document shall be discussed and agreed with both parties. (customer and supplier) note2 ? unless otherwise agreed upon in writing, the criter ia shall be applied to both parties. (customer and supplier)
TVL-55739GD032J-LW-G-AAN ver.b - 31 - i ssue date:2013/0 2 / 21 r r r o o o h h h s s s c c c o o o m m m p p p l l l i i i a a a n n n t t t 11. rohs compliant warranty rohs hazardous substances including: cd< 100 ppm pb< 1000 ppm hg< 1000 ppm cr +6 < 1000 ppm pbde < 1000 ppm pbb < 1000 ppm 12. precautions for use 12.1. safety (1) do not swallow any liquid crystal, even if ther e is no proof that liquid crystal is poisonous. (2) if the lcd panel breaks, be careful not to get liquid crystal to touch your skin. (3) if skin is exposed to liquid crystal, wash the area thoroughly with alcohol or soap. 12.2. storage conditions (1) store the panel or module in a dark place where the temperature is 235c and the humidity is below 5020%rh. (2) store in anti-static electricity container. (3) store in clean environment, free from dust, act ive gas, and solvent. (4) do not place the module near organics solvents or corrosive gases. (5) do not crush, shake, or jolt the module. (6) do not exposed to direct sun light of fluoresce nt lamps. 12.3. installing lcd module attend to the following items when installing the l cm. (1) cover the surface with a transparent protective plate or touch panel to protect the polarizer and lc cell.
TVL-55739GD032J-LW-G-AAN ver.b - 32 - i ssue date:2013/0 2 / 21 r r r o o o h h h s s s c c c o o o m m m p p p l l l i i i a a a n n n t t t 12.4. precautions for operation (1) viewing angle varies with the change of liquid crystal driving voltage (vo). adjust vo to show the best contrast. (2) driving the lcd in the voltage above the limit will shorten its lifetime. (3) response time is greatly delayed at temperature below the operating temperature range. however, this does not mean the lcd will be out of the order. it will recover when it returns to the specified temperature range. (4) when turning the power on, input each signal af ter the positive/negative voltage becomes stable. (5) do not apply mater or any liquid on product, wh ich composed of t/p. 12.5. handling precautions (1) avoid static electricity that can damage the cm os lsi; please wear the wrist strap when handling. (2) the polarizing plate of the display is very fra gile. so, please handle it very carefully. (3) do not give external shock. (4) do not apply excessive force on the surface; it may cause display abnormal. (5) do not wipe the polarizing plate with a dry clo th, as it may easily scratch the surface of plate. (6) do not use ketonics solvent & aromatic solvent, use with a soft cloth soaked with a cleaning naphtha solvent. (7) do not operate it above the absolute maximum ra ting. (8) do not remove the panel or frame from the modul e. (9) do not apply mater or any liquid on product, wh ich composed of t/p.
TVL-55739GD032J-LW-G-AAN ver.b - 33 - i ssue date:2013/0 2 / 21 r r r o o o h h h s s s c c c o o o m m m p p p l l l i i i a a a n n n t t t 12.6. guarantee 12.6.1. the period is within 12 months since the date of sh ipping out under normal using and storage conditions. 12.6.2. any defect not caused by kyocera display is not gua ranteed to the customer. the defect phenomenon should be agreed by both parties. 13. revision history version revise record date a new version 2012/03/07 b viewing direction remark 2012/04/24 b type no. change: ju-lw j-lw 2012/04/24

▲Up To Search▲

Price & Availability of TVL-55739GD032J-LW-G-AAN

	To Download TVL-55739GD032J-LW-G-AAN Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .